Impex PL-43211 User Manual
Marcy, Upright magnetic bike, Impex inc
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 5
- EXPLODED DIAGRAM………………………………………………………………. 9
- PARTS LIST...................................................................................................…. 10 COMPUTER................................................................................................…… 11
- WARRANTY.................................................................................................…. 13
- ORDERING PARTS....................................................................................... 13
- Part# Description Identifier
- ASSEMBLY INSTRUCTION
- Attach the Seat (#8) to the Seat Post (#7). Secure it with three Ø 5/8” Washers (#12), Spring Washers (#13), and M8 Aircraft Nuts (#14).
- Insert the Seat Post into the opening on the Main Frame (#1). Use a Seat Post Lock Knob (#11) to secure the Seat Post at desired height.
- Attach the Handle Bar (#5) to the Handlebar Post (#4). Secure it with a Bracket (#30), M8 x ¾” Allen Bolt (#27), and a T-shaped Knob (#26). Use the Knob to adjust the position of the Handlebar.
- A.) Thread the Left Pedal (#9) counterclockwise into the left Crank (#25). Thread the Right Pedal (#10) Clockwise into the Crank on the other side.
- EXPLODED DIAGRAM
- ASSEMBLY INSTRUCTION