Diagram 4 – Impex WM-354 User Manual

Page 8

STEP 4 (See Diagram 4)

A.) Attach the hole-side of the Backrest Supports (#14) onto both ends of the pivot on the Main

Seat Support (#6). Place the other end rest against the Backrest Adjustment Bar (#4).

B.) Place the Backrest Board (#15) onto the Backrest Supports. Secure it with four M6 x 1

3/8” Hex Bolts (#37) and Ø ½” Washers (#38).

C.) Place the Seat Pad (#16) onto the Main Seat Support. Secure it with four M6 x 1 3/8” Hex

Bolts (#37) and Ø ½” Washers (#38).

DIAGRAM 4