IDEAL INDUSTRIES 61-320 - Manual (Page 9)

Page 7
Physical and Environmental Characteristics
Characteristics Description
Dimensions (H x W x D)
158mm x 76mm x 38mm
164mm x 82mm x 44mm (with holster)
Weight (with battery) 0.3Kg
With holster 0.5Kg
Environmental Characteristics Description
Temperature operating 0 to + 50ºC
Non-Operating -20 to + 60ºC
Humidity (operating) < 80% R.H.
Altitude Operating 2,000 m (6560 ft.)
Non-Operating 12,300 m (40354 ft.)
Vibration & shock Operating
MIL-T-28800E TYPE II Class 5
2.66gRMS, 5 to 500 Hz, 3axes
(10 minutes each)
Indoor Use Indoor Use
Certifications and compliances
Safety Designed to IEC 1010-1, UL3111-1 and CSA specifications
Input rating V / Ω / µA: Category III 1000 Volts
mA: Category III 600 Volts
Over voltage category CAT III: Distribution level mains, fixed installation.
CAT II: Local level mains, appliances, portable equipment.
CAT I: Signal level, special equipment or parts of equipment,
telecommunication, electronics.
Pollution Degree 2
Do not operate in environments where conductive Pollutants may
be present.
EC Declaration of Conformity
Meets the intent of Directive 89/336/EEC for Electromagnetic
Compatibility and Low Voltage Directive 73/23/EEC for Product
Safety. Compliance was demonstrated to the following
specifications as listed in the official Journal
of the European Communities:
En 55011 Class A: Radiated and Conducted Emissions.
EN 50082-1 Immunity: IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiated
EN 61010-1 Safety requirements for electrical equipment for
measurement, control, and laboratory use.
Form number TM61320-2-4
Rev 2 September 2002