Intel System Board G4H875-B - Manual (Page 45)

45
2
Hardware Installation
I/O Connectors
Game/MIDI Port
The system board is equipped with a 15-pin connector at loca-
tion J2 for connecting an external game/MIDI port. The game/
MIDI port may be mounted on a card-edge bracket. Install the
card-edge bracket to the system chassis then connect the game/
MIDI port cable to connector J2. Make sure the colored stripe
on the ribbon cable is aligned with pin 1 of connector J2.
BIOS Setting
Configure the game port in the Integrated Peripherals submenu
(“Super I/O Device” section) of the BIOS. Refer to chapter 3 for
more information.
1 1 5
2
W