Diagram 4 – Impex MWB-4360 User Manual

Page 28

Text mode
Original mode

STEP 4 (See Diagram 4)

A.) Attach the Leg Developer (#5) to the open bracket on the Main Frame (#1). Secure it with an

Axle (#17), two M10 x ¾” Allen Bolts (#36), and two

∅

¾” Washers (#42).

B.) Insert one Foam Tube (#10) halfway through the hole on the Main Frame. Insert two Foam

Tubes halfway through the holes on the Leg Developer (#5). Push six Foam Rolls (#24) onto
the Tubes from both ends. Plug six Foam Roll End Caps (#25) into the Tubes.

C.) Slide the Olympic Sleeve (#20) onto the weight post on the Leg Developer. Attach a Spring

Clip (#22) to the Sleeve.

DIAGRAM 4