IBM Partner Pavilion Remote Supervisor Adapter - Manual (Page 66)

3. Click Redirect Server Console. A Java applet opens in a separate browser
window.
4. In the Password field, enter the remote control password. This password is
configured locally on the server in the BIOS setup menu (accessed by pressing
F1 in POST). For more information about the remote control password, refer to
the Remote Supervisor Adapter Installation Guide.
The server desktop opens on your screen.
Note: For optimal viewing, set the resolution of the remote system to one
setting smaller than the resolution of the monitor you will be viewing. For
example, set the remote system resolution to 800 x 600 pixels if the
monitor on which you are remotely viewing is set to 1024 x 768 pixels.
5. If a Microsoft Windows logon window opens, press Ctrl+Alt+Del to proceed. If
the remote desktop is already displayed, use the mouse or the keyboard to
navigate.
You can close the applet window at any time to disconnect from viewing the server
graphical console.
Viewing the server POST
Click View Remote POST to restart the server and view the POST. You can
interrupt the POST and access the server BIOS code run. You can view on your
monitor what you can view on the server desktop, and you have keyboard control of
the desktop.
Note: The text-based interface view area is 80 characters x 24 lines.
Complete the following steps to remotely access a server POST:
1. Log in to the Remote Supervisor Adapter. For more information, see Chapter 2,
“Opening and using the ASM Web interface” on page 3.
2. In the navigation pane, click Remote Control.
3. To access the server POST, click View Remote POST. A message is displayed,
confirming that the server will be restarted.
4. Enter the remote control password. This password is configured locally on the
server in the BIOS setup menu (accessed by pressing F1 in POST). For more
information about the remote control password, see the Remote Supervisor
Adapter Installation Guide.
The server restarts and you can view the POST. You can close the applet
window at any time to disconnect from viewing the server POST.
Viewing the server blue screen
Click View Windows Blue Screen to access an image of the blue screen captured
when the server stopped functioning.
If a Windows blue-screen event occurs while the operating system is running, but
then the server operating system stops running, the operating system timeout is
triggered, which causes the Remote Supervisor Adapter to capture the blue-screen
data and store it. The blue-screen image shows the date and time of the capture.
The image will not be overwritten during the next operating system installation
because the Remote Supervisor Adapter does not capture the operating system
loader screen. Only error conditions are captured and maintained. The Remote
Supervisor Adapter stores only the most recent error event information, overwriting
older information when a new error event occurs.
60 Remote Supervisor Adapter: User’s Guide