Invacare Wheelchair Atlas - Manual (Page 20)

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Atlas™ 20 Part No. 1130169
❑ Inspect for bent frame or crossbraces.
❑ Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect handrims for signs of rough edges or peeling.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear (hub and rim).
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure the casters are free of debris.
Troubleshooting
Maintenance Safety Precautions
ƽ WARNING
Unless otherwise noted, all service adjustments should be performed while the
wheelchair is unoccupied.
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may result.
Chair
Veers
Right/
Left
Chair 3
Wheels
Sluggish Turn or
Performance
Casters
Flutter
Squeaks
and
Rattles
Looseness
in
Chair
Solutions
X X X X
Check tires for
correct and equal
pressure.
X X X X
Check for loose nuts
and bolts.
X X
Check that rear
wheels are equally
spaced away from seat
frame.