Intel MB935 User Manual
Page 27
BIOS SETUP
MB935 User’s Manual
23
Time
The time format is:
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the
or +/- keys to set the current time.
IDE Channel Master/Slave
ICH9 supports 4 Serial ATA connectors; ITE controller support 1 CF
and 1 IDE connectors.
The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks . Each channel
can support up to two hard disks; the first is the “Master” and the second
is the “Slave”.
Press
Manual, and None. Select ‘Manual’ to define the drive information
manually. You will be asked to enter the following items.
Capacity :
Capacity/size of the hard disk drive
Cylinder :
Number of cylinders
Head :
Number of read/write heads
Precomp :
Write precompensation
Landing Zone : Landing zone
Sector :
Number of sectors
The Access Mode selections are as follows:
CHS
(HD < 528MB)
LBA
(HD > 528MB and supports Logical Block Addressing)
Large
(for MS-DOS only)
Auto