Insignia NS-LCD37HD-09 - Manual (Page 12)

10
Insignia NS-LCD37HD-09 37" LCD TV
www.insignia-products.com
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable to the VGA PIC jack on
the right side of your TV, then connect the
other end of the cable to the VGA jack on the
computer.
3 Connect an audio cable to the VGA AUDIO
jack on the right side of your TV, then connect
the other end of the cable to the AUDIO OUT
jack on the computer.
To play video from a computer:
1 Turn on your TV, then press INPUT. The
INPUT SOURCE menu opens.
2 Press or to select VGA, then press
ENTER.
3 Turn on the computer, then adjust the display
properties, if necessary.
Connecting a digital sound system
To connect a digital sound system:
1 Make sure that your TV’s power cord is
unplugged and the digital sound system is
turned off.
2 Connect a digital optical audio cable to the
S/PDIF jack on right side of your TV, then
connect the other end of the cable to the
S/PDIF IN jack on the digital sound system.
Connecting headphones
To connect headphones:
•
Connect the headphones to the headphone
jack on the left side of your TV.
Note
The VGA cable should be a 15-pin D-Sub cable
(analog RGB).
Note
The audio cable should have stereo mini plugs.
Right side of TV
Computer
VGA PIC jack
VGA AUDIO jack
Note
The S/PDIF jack works with digital TV channels
only.
Note
Loud noise can damage your hearing. When using
headphones, use the lowest volume setting that
still lets you hear the sound.
Right side of TV
Digital sound
system
S/PDIF jack
Left side of TV