InFocus XGA multimedia projector LP930 - Manual (Page 35)

26
U s i n g t h e P r o j e c t o r
Standby
When you press standby , the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 35 for details. While the projector is in
standby, the keypad and remote buttons do not affect the projec-
tor and the LED lights orange.
• If you press standby again within the standby time, the projec-
tor returns to normal operations immediately.
• If you don’t press standby again, the projector turns off after the
standby time.
Source (keypad only) or
Comp and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
source button on the keypad or the comp or video button on the
remote. Press comp to display your computer image. Press comp
again to toggle among the computer sources. The sources switch
in this order:
• Computer RGBHV
• Computer VESA
• Computer M1 Analog/Digital
• Computer CableWizard
Press video again to toggle among the video sources. The video
sources switch in this order:
• Component Video
• Composite Video
• S-Video
Volume + or -
•
To increase the volume, press + .
• To decrease the volume, press -.
Volume adjustments are saved for each source you have con-
nected.