Impex CB-359 - Manual (Page 7)

STEP 3 (See Diagram 3)
A.) Attach the hole-side of Backrest Supports (#9) to the pivot on the Main Seat Support
(#4). Secure it with one M12 x 6” Hex Bolt (#40), two Ø1” Washers (#42), and one
M12 Aircraft Nut (#46). Place the other end of Backrest Supports rest against the
Backrest Adjustment Bar.
B.) Place the Backrest Board (#17) onto the Backrest Supports (#9). Secure it with four
M6 x 1 3/8” Hex Bolts (#41) and
∅
½” Washers (#45).
C.) Place the Seat (#18) onto the Main Seat Support (#4). Secure it with four M6 x 1 3/8”
Hex Bolts (#41) and
∅
½” Washers (#45).
DIAGRAM 3
6