Integra DHC-9.9 - Manual (Page 125)

125
Advanced Setup
—Continued
This section explains items on the Hardware menu.
Note:
This procedure can also be performed on the AV control-
ler by using its [Setup] button, arrow buttons, and [Enter]
button.
Remote Control
■ Remote ID
When several Integra/Onkyo components are used in the
same room, their remote ID codes may overlap. To dif-
ferentiate the AV controller from the other components,
you can change its remote ID from 1, the default, to 2 or
3.
Note:
If you do change the AV controller’s remote ID, be sure
to change the remote controller to the same ID (see
below), otherwise, you won’t be able to control it with
the remote controller.
Changing the Remote Controller’s ID
Zone2/Zone3
See “Zone 2 and Zone 3” on page 130.
Hardware Setup
1 Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “7. Hardware
Setup”, and then press [Enter].
The “Hardware Setup” menu appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select an item, and then
press [Enter].
The screen for that item appears.
+
-
On Standby
TV
Input
TV CH
TV VOL
--/--- 10 11 12
D.TUN
+10 0 Clear
1 2 3
4 5 6
7 8 9
Input Selector
VCR/DVR CBL/SAT DVD
Tape Tuner CD
Phono
Game/TV
Macro
1 2 3
VCR DVD
CDR/MD
CD Zone 2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver TV Dock Cable
VOL
CH
Disc
Album
+
-
Enter
Top Men u Men
u
Display Muting
Exi t Gu ide
Prev
CH Ret urn Setu
p
Playlist Random Rec
SAT
Zone 3
AUX 1 AUX 2
Setup
Receiver
Input
Enter
Number
buttons
Remote
indicator
Receiver
Setu
p
Enter
Enter
7. Hardware Setup
1. Remote Control
2. Zone2/Zone3
3. Tuner
4. Analog
Multich
5. HDMI
6. Network
MOVE ENTER RETURN ENTER RETURN EXIT SETUP
Enter
4 Use the Up and Down [ ]/[ ] but-
tons to select an item, and use
the Left and Right [
]/[ ] but-
tons to change it.
The items are explained below.
5 When you’ve finished, press the
[Setup] button.
Setup closes.
1 While holding down the
[Receiver] Remote Mode button,
press the TV [Input] button.
The Remote indicator flashes four
times.
2 Use the number buttons to enter
ID 1, 2, or 3.
The Remote indicator flashes twice.
Enter
Setu
p
Receiver
TV
Input
1 2 3
VCR/DVR CBL/SAT DVD