Setting the menu (continued) – Memorex MLT1912 User Manual
Page 16
15
SETTING THE MENU (CONTINUED)
While in the PC mode and connected to a PC via the VGA
connector, follow Steps 1 and 2 on the previous page to
enter the menu as shown. Select Advanced using the
CHANNEL/Navigation UP 1 or DOWN 2 button and then
press the VOLUME UP/Navigation Right button 3.
1
Select an Advanced option (see below) using the
CHANNEL/Navigation UP 1 or DOWN 2 button, then press the
VOLUME UP/Navigation Right button 3 to select it. Set/adjust these
settings as desired:
AUTO ADJUST: Select and then use the CHANNEL/Navigation UP
1
or DOWN 2 button to select YES, then press the VOLUME
UP/Navigation Right button 3 to have the unit automatically fit the
computer window fully on the screen.
IMAGE POS. (Position): Select and then adjust the position of the
computer image on the screen using the CHANNEL/Navigation
UP 1/DOWN 2 buttons and VOLUME UP/Navigation
Right 3/VOLUME DOWN/Navigation Left 4 buttons.
PHASE: Select and then by using VOLUME UP/Navigation Right
3
/VOLUME DOWN/Navigation Left 4 buttons to adjust the phase.
H STRETCH: Select and then by using VOLUME UP/Navigation
Right 3/VOLUME DOWN/Navigation Left 4 buttons to adjust the
Horizontal Stretch the computer image on the screen.
AUTO COLOR: Select and the color will be automatically adjusted.
NOTE: When finished, press the MENU button repeatedly to exit
the menus.
2
3
1
2
3
1
2
4
SETTING THE ADVANCED OPTIONS (PC MODE ONLY)
While in the ATSC mode, follow Steps 1 and 2 on the
previous page to enter the menu as shown. Select Format
using the CHANNEL/Navigation UP 1 or DOWN 2 button
and then press the VOLUME UP/Navigation Right button
3
.
1
Select the desired format (Squeeze, Letterbox or Crop) using the
CHANNEL/Navigation UP 1 or DOWN 2 button, then press the
VOLUME UP/Navigation Right button 3 to select it.
SQUEEZE: Wide-screen programs are shown on the screen.
LETTERBOX: Wide-screen programs are shown on the screen,
but have black bars on the top and bottom of the screen.
CROP: Wide-screen programs are shown on the screen with 4:3
aspect ratio, some part of the screen may be cut automatically.
NOTE: This function is for wide-screen TV programs only, there
will be no function if the program is broadcast with 4:3 format.
3
1
2
2
3
1
2
SETTING THE FORMAT (ATSC MODE ONLY)
NOTE:
• If no buttons are pressed for approx. 10 seconds, the menu will disappear automatically.