Power source location of controls – Memorex MT2025D User Manual

Page 6

POWER SOURCE

LOCATION OF CONTROLS

1. Audio 2 IN/Video 2 IN/Headphone Jacks (Side of

Unit)–Insert A/V cables from another unit (i.e. DVD

player) into the A/V 2 IN jacks. Connect headphones

for private listening.

2. MENU Button–Press to access the on-screen

menu.

3. TV/AV Button–Press to select the desired source.
4. VOLUME Down Button–Press to lower the volume

or navigate left in the setting menu.

5. VOLUME Up Button–Press to raise the volume or

navigate right in the setting menu.

6. CHANNEL Down Button–Press to select a lower-

numbered channel or navigate down in the

setting menu.

7. CHANNEL Up Button–Press to select a higher-

numbered channel or navigate up in the setting

8. Display
9. Remote Sensor
10. Power Indicator–Standby light red, Power On

light green–Lights red when the unit is Standby

mode and lights green when the unit is on.

11. Power Button–Press to turn the TV on; the Power

indicator will light green. Press again to turn the TV

off; the Power indicator will light red.

FRONT

Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having

120V, 60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility

of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file

or cut the wide blade. It is the user’s responsibility to have an electrician replace the

obsolete outlet.

AC Plug

AC Outlet

NOTE:

When setting the TV Menus, the Channel Up/Down buttons are used as Navigation Up/Down and the

Volume Up/Down buttons are used as Navigation Right/Left.