Monster Power HTS2600 - Manual (Page 31)

TROUBLESHOOTING (continued)
PROBLEM – Timed LED on front panel is Off.
Possible Cause #1
You are using the Timed Outlet Remote Turn-On feature (Same as Switched) and haven’t plugged the two-prong cord
into the component you wish to use to activate the Remote Turn-On.
Possible Solution
• Plug the 2-prong cord into the component you wish to use to activate the Remote Turn-On.
Possible Cause #2
The component remote control you are using to power the Remote turn-on has a dead battery.
Possible Solution
• Replace the battery powering the component remote control.
Possible Cause #3
The component you wish to use to activate the Remote Turn-On isn’t plugged into a properly grounded 120V outlet.
Possible Solution
• Plug the component you wish to use to activate the Remote Turn-On
into a properly grounded 120V outlet.
25