Monster Power HTS2600 - Manual (Page 13)

7
STEP 2 Video Outlet (Unswitched) Hookup
NOTE
These outlets are "unswitched" because some components perform best when powered continuously. A VCR,
for example, should be plugged into one of these outlets to avoid the hassle of resetting its clock when power
is interrupted. Whether you turn your PowerCenter on or off, any component plugged into these outlets will receive
continuous power as long as your PowerCenter is plugged into a properly grounded 120 volt wall socket.
You can plug any type of analog video component (e.g., VCR, camcorder) or digital component
(e.g., MiniDisc, digital video camcorder) into this outlet.
A) Attach a Monster Power ® ID label to each component’s power cord before you plug it into the appropriate
color-coded PowerCenter outlet.
B) RECEIVER: Plug the receiver’s power cord into the HTS 2600’s corresponding
RECEIVER outlet.
C) CABLE/SAT: If you have a Cable TV box, plug its power cord into the HTS 2600’s corresponding CABLE/SAT
outlet. If you are using a Satellite Receiver, plug its power cord into the corresponding CABLE/SAT outlet.
D) DVD/CD: If you have a DVD player, plug its power cord into the corresponding DVD/CD outlet. If you are
using a CD player, plug its power cord into the corresponding DVD outlet. If you have both a CD player
and DVD player, you can plug either component into any available "Unswitched" PowerCenter outlet.