Monster Power HTS2600 - Manual (Page 30)

TROUBLESHOOTING (continued)
PROBLEM – The Switched LED is Off.
Possible Cause #1
You are using the Switched Outlet Remote Turn-On feature and haven’t plugged the two-prong cord
into the component you wish to use to activate the Remote Turn-On.
Possible Solution
• Plug the two-prong cord into the component you wish to use to activate the Remote Turn-On.
Possible Cause #2
The component remote control you are using to power the Remote turn-on has a dead battery.
Possible Solution
• Replace the battery powering the component remote control.
Possible Cause #3
The component you wish to use to activate the Remote Turn-On isn’t plugged into a properly grounded 120V outlet.
Possible Solution
• Plug the component into a properly grounded 120V outlet.
24