Monster Power HTS2600 User Manual

Page 23

HTS 2600 FEATURES

NUMBERS REFER TO DRAWING ON PAGE 16

1. ON/OFF Switch: Once the PowerCenter is plugged into a properly grounded 120V outlet, pressing this button
will provide AC power to the components plugged into the PowerCenter’s Switched and Switched (Timed) outlets.
Release this button to shut down Switched and Switched (Timed) components.

IMPORTANT NOTE If you turn on the PowerCenter using the On switch, you must use the Off switch
to turn the unit Off. You can’t turn the unit off via the PowerCenter’s remote control inputs (AC or DC),
when the front panel On switch is engaged. If you turn on the PowerCenter using the remote control feature,
you can’t turn the unit Off via the PowerCenter’s Off switch.

2. Ground OK LED: When this LED is On, the PowerCenter is plugged into a properly grounded 120V AC
power outlet. If the LED is Off, unplug the PowerCenter immediately. Monster Cable

is not responsible

for equipment damage due to improper grounding of your home’s outlets.

3. Wiring OK LED: Indicates that polarity is correct on AC lines. If the LED is off, unplug the HTS 2600
and consult an electrician.

4. Clean Power On LED: Indicates Monster Clean Power circuitry is functioning.

5. Switched ON LED: Indicates power is being supplied to switched outlets.