MITSUBISHI ELECTRIC PKA-AGAL - Manual (Page 6)

6
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
Day of the Week &
Time display
˚F
˚F
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF 2 4
9
¡
q
1. Press the or Set Time button q to show display ™.
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at £: Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button q as necessary to set the time.
* As you hold the button down, the time (at ¢) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
Time Setting
TIME SUN
™
£
¢
Day of the Week Setting
4. Setting the Day of the Week and Time
˚F ˚F
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF 2
7
™
£
3
8
§
¢
∞
•
¶
¡
1
5
6
Mode
Temperature setting
Fan speed
Airflow up/down
Remote Controller settings
Last operation mode
Last set temperature
Last set fan speed
COOL or DRY
Mode HEAT
FAN
Horiz. outlet *
Last setting
Horiz. outlet *
™
∞
§
1
2 6
5
3
£
¶
7
5.1. Turning ON/OFF
■ Press the ON/OFF button 1.
• The ON lamp ¡ and the display area come on.
Note:
● When the unit is restarted, initial settings are as follows.
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
● Function Selection of remote controller:
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
● Set Day/Time: Set the current day of the week or time.
● Standard Control Screens:
View and set the air conditioning system’s oper-
ating status
● Timer Monitor: View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
● Timer Setup: Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
A :Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B :Press the Timer Menu button.
C :Press the Mode (Return) button.
D :Press either of the Set Time buttons (
or ).
˚F
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
˚F
˚F
TIME SUN
Function Selection of remote controller Set Day/Time
Standard Control Screens
OFF ON
Timer Monitor Timer Setup
A D C
B C
B
3. Screen Configuration
5. Operation
* It will be set by last setting for wired remote controller.
BG79U794H02_en 05.12.22, 2:02 PM 6