Xseries programming quick reference – Motorola XU2100 User Manual
Page 34
X
Series Programming Quick Reference
Function
Appearance
Press & hold MQfor 3 sec. and turn on radio.
k
displays.
*Channel
Use [or ] for
1 through 6.
Frequency
Press \ until
l
displays. To
change, press [or ].
*depending upon model
*
depending upon model
Interference
Eliminator
Code
Appears after
l
shows. Set
for each channel.
*Scramble
Code
Press \ until e displays. Must
be set to same code for all radios.
Bandwidth
Press \ until K displays. Press
[
or ] to select D (25.0 kHz)
or C (12.5 kHz).
Note: If bandwidth is not flashing,
it is not selectable on the
chosen frequency.
2
1
e
K
C
X
Series Programming Quick Reference
Radio On
Visual
\
as needed, then [or ]
*Available
Channels
Press \ until = displays.
Press [ or ] to select number of
available channels.
Call Tone
Choose
1, 2, 3, or
0
= Off (default).
Microphone
Gain
Choose:
1 Low Sensitivity
2 Medium Sensitivity
3 High Sensitivity
*Scan List
Press [ or ] to select channel,
then choose Y (yes) to include or
n
(no) to exclude by pressing J.
*depending upon model
6
=
E
?
Y