Motorola XU2100 - Manual (Page 14)

25
Ba
tter
y and Char
g
ing Options
X
XTN Series Factory Defaults
Your XTN radio is programmed at the factory to the following settings. If you need to
change settings, refer to Programming Features on page 31.
To restore your radio to factory default programming, turn the radio on while holding
the M and \for three seconds.
UHF VHF
Channel Frequency Bandwidth Frequency Bandwidth
1 2 25.0 3 25.0
2 8 25.0 4 25.0
3 5 25.0 1 25.0
4 6 25.0 2 25.0
5 10 12.5 10 25.0
6 12 12.5 12 25.0
• Code: On (1)
• Call Tone: Off (0)
• VOX: Off (0)
• Scramble: Off (0)
T
a
lking and Receiving
26
X
Talking and Receiving
Signal Strength Indicator/Channel Busy
Note: Obstacles that block the signal path may affect the strength of the incoming
signal.
Talk Range
The radio displays
w when activity is on the frequency, and the
transmit light flashes at a faster rate of once per second.
When receiving, the display will show
w and a signal strength from
1 (weakest) through 6 (strongest). This can help determine when a
radio is moving out of range.
Model
Industrial Multi-Level Outdoor
Inside steel/concrete
industrial buildings
Inside multi-level
buildings
Flat ground with no
obstructions
UHF 2W Up to 250,000 Sq. Ft. Up to 20 Floors Up to 6 Miles
UHF 1W Up to 200,000 Sq. Ft. Up to 15 Floors Up to 5 Miles
VHF 2W Up to 180,000 Sq. Ft. Up to 10 Floors Up to 6 Miles
VHF 1W Up to 150,000 Sq. Ft. Up to 8 Floors Up to 5 Miles
1
6