Mountain Buggy Buggy Range Outside Cove - Manual (Page 6)

4
Front Wheel
1. Holding both knobs at the same time,
unscrew and pull out the front axle.
2. Insert the front wheel.
3. Re-insert the axle and tighten both knobs by
hand to secure wheel in place.
To remove
Repeat above in reverse.
Front Swivel Wheel (Urban models)
Locking the front wheel swivel(s) is recommended for use on
uneven ground.
To lock: pull knob out and turn it so the ‘locked’
symbol is at the top. Then swivel front wheel
under stroller until it locks into place.
To unlock: pull knob out and turn it 1/4 of a turn so the
‘unlocked’ symbol is at the top.
Rear Wheel Assembly
1. Slide wheel (with brake cog facing inwards)
onto each end of the axle.
2. Push each wheel on until it clicks into place.
Pull wheel to check it is secure.
knob
Wheel Assembly
axle
spacer axle
axle
brake cog
To remove
Depress quick
release clip and
slide wheel off
axle.
NB: On Terrain Double
remember to insert
the spacer between
the front wheels.