Maxtor 10K V User Manual
Maxtor atlas 10k v, Product manual
Table of contents
Document Outline
- Table of Contents
- List of Figures
- List of Tables
- Chapter 1 ABOUT THIS MANUAL
- 1.1 AUDIENCE
- 1.2 MANUAL ORGANIZATION
- 1.3 TERMINOLOGY AND CONVENTIONS
- 1.4 REFERENCES
- Chapter 2 GENERAL DESCRIPTION
- 2.1 PRODUCT OVERVIEW
- 2.2 KEY FEATURES
- 2.3 REGULATORY COMPLIANCE STANDARDS
- 2.4 HARDWARE REQUIREMENTS
- Chapter 3 INSTALLATION
- 3.1 SAFETY, HANDLING, & ELECTROSTATIC DISCHARGE PROTECTION
- 3.1.1 Safety Precautions
- 3.1.2 Handling
- 3.1.3 Electrostatic Discharge (ESD) Protection
- 3.2 SPACE REQUIREMENTS
- Figure 3-1 Dimensions for the Maxtor Atlas 10K V Hard Disk Drives
- 3.2.1 Shock Feet
- 3.3 UNPACKING INSTRUCTIONS
- Figure 3-2 Drive Packing Assembly
- 3.4 HARDWARE OPTIONS
- 3.4.1 Configuration Jumpers and Connections
- 3.4.2 Jumper Options on the 68-Pin Wide PCB
- Figure 3-3 Jumper Locations on the 68-Pin Wide SCSI Drive PCB
- Table 3-1 SCSI ID Selection on Option Connector (68-Pin SCSI Connector Drives)
- 3.4.2.1 Write Protection
- 3.4.2.2 Delay Spin (DS), Stagger Spin (SS)
- Option 1 (No jumpers installed):
- Option 2 (Delay Spin jumper installed):
- 3.4.2.3 Single-Ended Operation - Force SE (Disable LVD)
- 3.4.2.4 Remote Busy and Fault Displays
- Remote Fault LED
- 3.4.3 SCA-2 80-Pin Connector Versions
- 3.4.3.1 Termination for the 80-Pin SCA-2 Connector Versions
- 3.4.3.2 SCSI ID for SCA-2 Versions
- Figure 3-4 Pin Locations on SCA-2 Connector
- Table 3-2 SCSI ID Pin Assignments (SCA-2 Connector Versions of the Disk Drive)
- 3.4.3.3 Spin Up for the 80-Pin SCA-2 Connector Versions
- Table 3-3 Spin Up on Power On Options
- 3.4.3.4 Activity LED for SCA-2 Connector Versions
- 3.5 INTERFACE CONNECTOR (J1)
- Figure 3-5 J1 Interface Connector Configurations
- 3.5.1 68-Pin Wide SCSI Connector - LVD
- Table 3-4 68-Pin Wide LVD Pin Assignments
- 3.5.1.1 68-Pin Wide Mating Connector
- 3.5.2 80-Pin SCA-2 SCSI Connector - LVD
- Table 3-5 80-Pin SCA-2 LVD Pin Assignments
- 3.5.2.1 80-Pin SCA-2 Mating Connectors
- 3.5.3 68-Pin Wide Single-Ended SCSI Connector
- Table 3-6 68-Pin Wide Single-Ended Pin Assignments
- 3.5.4 80-Pin SCA-2 Single-Ended SCSI Connector
- Table 3-7 80-Pin SCA-2 Single-Ended Pin Assignments
- 3.6 DRIVE MOUNTING and installation
- 3.6.1 Orientation
- Figure 3-6 Mounting Dimensions Maxtor Atlas 10K V Drives
- 3.6.2 Mounting Screw Clearance
- Figure 3-7 Mounting Screw Clearance for Maxtor Atlas 10K V Drive
- 3.6.3 Mounting
- 3.6.4 Ventilation
- Figure 3-8 Lengthwise Airflow Cooling
- Figure 3-9 Crosswise Airflow Cooling
- Chapter 4 SPECIFICATIONS
- 4.1 SPECIFICATION SUMMARY
- Table 4-1 Specifications
- 4.2 FORMATTED CAPACITY
- Table 4-2 Formatted Capacity
- 4.3 DATA TRANSFER RATES
- 4.4 TIMING SPECIFICATIONS
- Table 4-3 Timing Specifications for Maxtor Atlas 10K V
- 4.5 POWER
- 4.5.1 Power Sequencing
- 4.5.2 Power Reset Limits
- Table 4-4 Power Reset Limits1
- 4.5.3 Drive Power Dissipation
- Table 4-5 Power Dissipation in Various Modes (Low-Profile Drives)
- 4.6 ACOUSTICS
- Table 4-6 Acoustical Characteristics-Sound Power per ISO 7779
- 4.6.1 Acoustic Toned Quality
- 4.7 MECHANICAL
- 4.8 ENVIRONMENTAL CONDITIONS
- Table 4-7 Environmental Specifications
- 4.9 ELECTROMAGNETIC CONDITIONS
- 4.9.1 EMI/RFI Susceptibility
- 4.9.2 ESD
- 4.9.3 Sensitivity to Magnetic Fields
- 4.10 SHOCK AND VIBRATION
- Table 4-8 Shock and Vibration Specifications
- 4.11 RELIABILITY
- 4.12 DISK ERRORS
- Table 4-9 Error Rates
- Chapter 5 SCSI Description
- 5.1 Overview of the SCSI Command Descriptions
- Table 5-1 Supported SCSI Commands
- 5.2 Command Descriptor Block
- Table 5-2 Typical (6-Byte) Command Descriptor Block-Data Format
- Table 5-3 Command Descriptor Block-Field Descriptions
- Table 5-4 Typical (6-Byte) Command Descriptor Block - Data Format
- Table 5-5 Command Descriptor Block Control Field-Field Descriptions
- 5.3 Status/Error Reporting
- Table 5-6 Status Codes
- 5.4 Linked Commands
- 5.5 DATA Transfer Command Components
- Table 5-7 Length Fields
- Table 5-8 DATA-Phase Command Contents
- 5.6 SCSI COMMAND DESCRIPTIONS
- 5.7 CHANGE OPERATING DEFINITION (40h)
- Table 5-9 CHANGE DEFINITION Command Descriptor Block-Data Format
- Table 5-10 CHANGE DEFINITION-Field Descriptions
- 5.8 FORMAT UNIT Command (04h)
- Table 5-11 FORMAT UNIT Command Descriptor Block-Data Format
- Table 5-12 FORMAT UNIT Command-Field Descriptions
- 5.8.1 Five Forms of FORMAT UNIT Command s
- Table 5-13 FORMAT UNIT Command Supported Options
- 5.8.2 FORMAT UNIT Parameter List
- Table 5-14 FORMAT UNIT Parameter List-Data Format
- 5.8.2.1 FORMAT UNIT Defect List Header
- Table 5-15 .FORMAT UNIT Defect List Header-Data Format
- Table 5-16 FORMAT UNIT Defect List Header-Field Descriptions
- 5.8.2.2 FORMAT UNIT Defect Descriptor-Block Format
- Table 5-17 FORMAT UNIT Defect Descriptor-Block Format
- 5.8.2.3 FORMAT UNIT Defect Descriptor - Physical Sector and Bytes From Index Format
- Table 5-18 FORMAT UNIT Defect Descriptor- Physical Sector and Bytes From Index Format
- 5.8.2.4 FORMAT UNIT Initialization Pattern Descriptor
- Table 5-19 FORMAT UNIT Initialization Pattern Descriptor-Data Format
- Table 5-20 FORMAT UNIT Initialization Pattern Descriptor-Field Descriptions
- Table 5-21 FORMAT UNIT Initialization Pattern Type
- 5.9 INQUIRY Command (12h)
- Table 5-22 INQUIRY Command Descriptor Block-Data Format
- Table 5-23 INQUIRY Command Descriptor Block-Field Descriptions
- 5.9.1 Standard Inquiry Data Page
- Table 5-24 Standard Inquiry Data Page-Data Format
- Table 5-25 Standard Inquiry Data Page-Field Descriptions
- 5.9.2 Vital Product Data Pages
- 5.9.2.1 Supported Vital Product Data Pages Page (00h)
- Table 5-26 Supported Vital Product Data Pages -Data Format
- Table 5-27 Vital Product Data-Page Codes
- 5.9.2.2 Unit Serial Number Page (80h)
- Table 5-28 Unit Serial Number Page-Data Format
- Table 5-29 Unit Serial Number Page-Field Descriptions
- 5.9.2.3 Implemented Operating Definition Page (81h)
- Table 5-30 Implemented Operating Definition Page-Data Format
- Table 5-31 Implemented Operating Definition Page-Field Descriptions
- 5.9.2.4 ASCII Implemented Operating Definition Page (82h)
- Table 5-32 ASCII Implemented Operating Definition Page - Data Format
- 5.9.2.5 Device Identification Page (83h) (SCSI-3 ONLY)
- Table 5-33 Device Identification Page - Data Format
- Table 5-34 Device Identification Page - Field Description
- 5.9.2.6 Command Support Data Pages
- Table 5-35 Command Support Data Page-Data Format
- Table 5-36 Command Support Data Page-Field Descriptions
- Table 5-37 Command Support Data Page Command or Operation Codes
- 5.10 LOG SELECT Command (4Ch)
- Table 5-38 LOG SELECT Command Descriptor Block-Data Format
- Table 5-39 LOG SELECT Command Descriptor Block-Field Descriptions
- 5.11 LOG SENSE Command (4Dh)
- Table 5-40 Disk Drive Log Pages
- 5.11.1 LOG SENSE Command Descriptor Block
- Table 5-41 LOG SENSE Command Descriptor Block-Data Format
- Table 5-42 LOG SENSE Command Descriptor Block-Field Descriptions
- 5.11.2 LOG SENSE Log Pages
- Table 5-43 LOG SENSE Log Page Format-Data Format
- Table 5-44 LOG SENSE Log Page Format-Field Descriptions
- Table 5-45 Generic Log Parameter-Data Format
- Table 5-46 Generic Log Parameter-Field Descriptions
- 5.12 MODE SELECT (6) Command (15h)
- Table 5-47 MODE SELECT (6) Command Descriptor Block-Data Format
- Table 5-48 MODE SELECT (6) Command Field Descriptions
- 5.12.1 Initiator-Changeable Mode Pages
- Table 5-49 Initiator-Changeable Mode Pages
- 5.12.2 Mode Page Types
- Table 5-50 Mode Page Types
- 5.12.3 Mode Parameter List
- Table 5-51 Mode Parameter List-Data Format
- Table 5-52 Mode Parameter List-Field Descriptions
- Table 5-53 Mode Parameter Header (6-Byte)-Data Format
- Table 5-54 Mode Parameter Header- Field Descriptions
- Table 5-55 Mode Parameter Block Descriptor-Data Format
- Table 5-56 Mode Parameter Block Descriptor-Field Descriptions
- 5.12.4 Categories of Changeable Pages
- Table 5-57 Categories of Changeable Pages
- 5.12.5 Unit Attention Condition Page (00h)
- Table 5-58 Unit Attention Condition Page (Page 0)
- Table 5-59 Unit Attention Condition Page (Page 0)
- 5.12.6 Read-Write Error Recovery Page (01h)
- Table 5-60 Read-Write Error Recovery Page-(Page 1)
- Table 5-61 Read-Write Error Recovery Page - Field Descriptions
- 5.12.7 Disconnect-Reconnect Page (02h)
- Table 5-62 Disconnect-Reconnect Page (Page 2)
- Table 5-63 Disconnect-Reconnect-Field Descriptions (Page 2)
- 5.12.8 Verify Error Recovery Page (07h)
- Table 5-64 Verify Error Recovery Page-(Page 7)
- Table 5-65 Verify Error Recovery Page-Field Descriptions (Page 7)
- 5.12.9 Caching Page (08h)
- Table 5-66 Caching Page-(Page 8)
- Table 5-67 Caching Page - Field Descriptions
- 5.12.10 Control Mode Page (0Ah)
- Table 5-68 Control Mode Page - Data Format (Page 0Ah)
- Table 5-69 Control Mode Page-Field Descriptions
- 5.12.11 Notch and Partition Page (0Ch)
- Table 5-70 Notch and Partition Page-(Page 0Ch)
- Table 5-71 Notch and Partition Page-Field Descriptions
- 5.12.12 Port Control Mode Page (19h)
- Table 5-72 Port Control Page Short Format
- Table 5-73 Port Control Page Long Format
- 5.12.12.1 Margin Control Subpage (Sub Page 1 of Mode Page 19)
- Table 5-74 Margin Control Subpage (01h)
- Table 5-75 Field Descriptions
- 5.12.12.2 Saved Training Configuration Values Subpage (Sub Page 2 of Mode Page 19)
- Table 5-76 Saved Training Configuration Subpage (02h)
- 5.12.12.3 Negotiated Settings Subpage (Sub Page 3 of Mode Page 19)
- Table 5-77 Negotiated Settings Subpage (03h)
- Table 5-78 Transceiver Period Factor
- Table 5-79 Transceiver Mode
- 5.12.12.4 Report Transfer Capabilities Subpage - (Sub Page 4 of Mode Page 19)
- Table 5-80 Report Transfer Capabilities Subpage (4)
- Table 5-81 Field Descriptions
- 5.12.13 Information Exceptions Control Page (1Ch)
- Table 5-82 Information Exceptions Control Page-(Page 1Ch)
- Table 5-83 Information Exceptions Control Page-Field Descriptions (Page 1Ch)
- Table 5-84 Codes Used by the MRIE Field
- 5.13 MODE SELECT (10) Command (55h)
- Table 5-85 MODE SELECT (10) Command Descriptor Block-Data Format
- Table 5-86 Mode Parameter Header (10-Byte)-Data Format
- Table 5-87 Mode Parameter Block Descriptor-Data Format
- Table 5-88 Mode Parameter Block Descriptor-Field Descriptions
- 5.14 MODE SENSE (6) Command (1Ah)
- Table 5-89 MODE SENSE (6) Command Descriptor Block-Data Format
- Table 5-90 MODE SENSE Command-Field Descriptions
- Table 5-91 Mode Parameter Header (6 Byte)-Data Format
- Table 5-92 Mode Parameter Header and Block Descriptor-Field Descriptions
- 5.14.1 Read-Only Mode Pages
- Table 5-93 Read-Only Mode Pages
- 5.14.2 Format Device Page (03h)
- Table 5-94 Format Device Page-(Page 3)
- Table 5-95 Format Device Page-Field Descriptions (Page 3)
- 5.14.3 Rigid Disk Geometry Page (04h)
- Table 5-96 Rigid Disk Geometry Page-(Page 4)
- Table 5-97 Rigid Disk Geometry Page-Field Descriptions (Page 4)
- 5.15 MODE SENSE (10) Command (5Ah)
- Table 5-98 MODE SENSE (10) Command Descriptor Block-Data Format
- Table 5-99 Mode Parameter Header (10 Byte)-Data Format
- Table 5-100 Mode Parameter Block Descriptor-Data Format
- Table 5-101 Mode Parameter Header & Block Descriptor -Field Descriptions
- 5.16 PERSISTENT RESERVATION IN Command (5Eh)
- Table 5-102 PERSISTENT RESERVATION IN Command Descriptor Block-Data Format
- Table 5-103 PERSISTENT RESERVATION IN Command-Field Descriptions
- Table 5-104 Read Keys Parameters-Data Format
- Table 5-105 Read Keys Parameters-Field Descriptions
- Table 5-106 Read Reservations Parameters-Data Format
- Table 5-107 Read Reservations Parameters-Field Descriptions
- Table 5-108 PERSISTENT RESERVATION IN Read Reservations Descriptor-Data Format
- Table 5-109 PERSISTENT RESERVATION IN Read Reservations Descriptor-Field Descriptions
- Table 5-110 Persistent Reservation Type Codes and Their Meanings
- Table 5-111 When Do Conflicts Between Existing Reservations and New Reservations Exist?
- 5.17 PERSISTENT RESERVATION OUT Command (5Fh)
- Table 5-112 PERSISTENT RESERVATION OUT Command Descriptor Block-Data Format
- Table 5-113 PERSISTENT RESERVATION OUT Command-Field Descriptions
- Table 5-114 PERSISTENT RESERVATION OUT Command’s Service Action Descriptions
- Table 5-115 Persistent Reservation Type Codes and Their Meanings
- Table 5-116 PERSISTENT RESERVATION OUT Parameter List-Data Format
- Table 5-117 PERSISTENT RESERVATION OUT Parameter List-Field Descriptions
- Table 5-118 Device Server Interpretation of Service and Scope Value
- 5.18 READ (6) Command (08h)
- Table 5-119 READ (6) Command-Data Format
- Table 5-120 READ (6) Command -Field Descriptions
- 5.19 READ (10) Command (28h)
- Table 5-121 READ (10) Command -Data Format
- Table 5-122 READ (10) Command -Field Descriptions
- 5.20 READ BUFFER Command (3Ch)
- Table 5-123 READ BUFFER Command-Data Format
- Table 5-124 READ BUFFER Command -Field Descriptions
- 5.21 READ CAPACITY Command (25h)
- Table 5-125 READ CAPACITY Command-Data Format
- Table 5-126 READ CAPACITY Command -Field Descriptions
- Table 5-127 READ CAPACITY Returned Data-Data Format
- 5.22 READ DEFECT DATA Command (10) (37h)
- Table 5-128 READ DEFECT DATA (10) Command -Data Format
- Table 5-129 READ DEFECT DATA (10) Command -Field Description
- Table 5-130 Defect Descriptor-Block Format.
- Table 5-131 Defect Descriptor-Bytes From Index Format, or Physical Sector Format
- Table 5-132 Defect List Header -Data Format
- Table 5-133 Defect List Header -Field Descriptions
- 5.23 READ DEFECT DATA Command (12) (B7h)
- Table 5-134 READ DEFECT DATA (12) Command -Data Format
- Table 5-135 READ DEFECT DATA (12) Command-Field Description
- Table 5-136 Defect Descriptor-Block Format
- Table 5-137 Defect Descriptor-Bytes From Index Format, or Physical Sector Format
- Table 5-138 Defect List Header-Data Format
- Table 5-139 Defect List Header -Field Descriptions
- 5.24 READ LONG Command (3Eh)
- Table 5-140 READ LONG Command Descriptor Block-Data Format
- Table 5-141 READ LONG Command Descriptor Block-Field Descriptions
- Table 5-142 READ LONG Command -Returned Data
- 5.25 READ SKIP MASK Command (E8h)
- Table 5-143 READ SKIP MASK Command-Data Format
- Table 5-144 READ SKIP MASK Command-Field Description
- 5.26 REASSIGN BLOCKS Command (07h)
- Table 5-145 REASSIGN BLOCKS Command Descriptor Block-Data Format
- Table 5-146 REASSIGN BLOCKS Defect List Header-Data Format
- Table 5-147 REASSIGN BLOCKS Defect List Header -Field Description
- Table 5-148 REASSIGN BLOCKS Defect Descriptor-Data Format
- 5.27 RECEIVE DIAGNOSTIC RESULTS Command (1Ch)
- Table 5-149 Diagnostic Pages Supported by The Drives
- Table 5-150 RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block-Data Format
- Table 5-151 RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block-Field Descriptions
- 5.27.1 Supported Diagnostics Pages Page (00h)
- Table 5-152 Supported Diagnostics Pages Page-Data Format
- 5.27.2 Translate Address Page (40h)
- Table 5-153 Translate Address Page-Data Format
- Table 5-154 Translate Address Page-Field Descriptions
- 5.28 RELEASE (6) Command (17h)
- Table 5-155 RELEASE (6) Command Descriptor Block-Data Format
- Table 5-156 RELEASE (6) Command -Field Descriptions
- 5.29 RELEASE (10) Command (57h)
- Table 5-157 RELEASE (10) Command Descriptor Block-Data Format
- Table 5-158 RELEASE (10) Command - Field Descriptions
- 5.30 REPORT DEVICE IDENTIFIER Command (A3h)
- Table 5-159 REPORT DEVICE IDENTIFIER Command Descriptor Block-Data Format
- Table 5-160 REPORT DEVICE IDENTIFIER Command Descriptor Block-Field Descriptions
- Table 5-161 REPORT DEVICE IDENTIFIER Parameter List-Data Format
- Table 5-162 REPORT DEVICE IDENTIFIER Parameter List-Field Descriptions
- 5.31 REPORT LUNS Command (A0h)
- Table 5-163 REPORT LUNS Command Descriptor Block-Data Format
- Table 5-164 REPORT LUNS Command Descriptor Block-Field Description
- Table 5-165 LUN Reporting Parameter List -Data Format
- 5.32 REQUEST SENSE Command (03h)
- Table 5-166 REQUEST SENSE Command Descriptor Block-Data Format
- Table 5-167 REQUEST SENSE Command Descriptor Block-Field Description
- 5.32.1 Sense Data Availability
- 5.32.2 Status Reporting
- 5.32.3 Sense Data Format for Error Code 70h and Error Code 71h
- Table 5-168 Sense Data Format for Error Code 70h or 71h-Data Format
- Table 5-169 Sense Data Fields (Error Code 70h)-Field Descriptions
- Table 5-170 Supported Sense Key s
- Table 5-171 Sense Key Information Field Contents
- Table 5-172 Supported Additional Sense Codes and Sense Code Qualifiers (in Hex)
- Table 5-173 Sense-Key Specific Field Contents
- Table 5-174 ILLEGAL REQUEST Sense Key Field Pointer Bytes\Data Format
- Table 5-175 ILLEGAL REQUEST Sense Key Field Pointer Bytes \Field Descriptions
- Table 5-176 NOT READY Sense Key - Progress Indication Bytes\Data Format
- Table 5-177 NOT READY Sense Key - Progress Indication Bytes\Field Descriptions
- Table 5-178 MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count-Data Format
- Table 5-179 MEDIUM ERROR or RECOVERED ERROR Sense Key - Retry Count
- 5.33 RESERVE (6) Command (16h)
- Table 5-180 RESERVE (6) Command Descriptor Block-Data Format
- Table 5-181 RESERVE (6) Command -Field Descriptions
- 5.34 RESERVE (10) Command (56h)
- Table 5-182 RESERVE (10) Command Descriptor Block-Data Format
- Table 5-183 RESERVE (10) Command -Field Descriptions
- Table 5-184 Extent Descriptors-Data Format
- Table 5-185 Reservation Types
- Table 5-186 Parameter List When LongID and Extent Bits = 1-Data Format
- Table 5-187 RESERVE (10) ID Only Parameter List-Data Format
- 5.35 REZERO UNIT Command (01h)
- Table 5-188 REZERO UNIT Command Descriptor Block-Data Format
- 5.36 SEEK (6) Command (0Bh)
- Table 5-189 SEEK (6) Command Descriptor Block-Data Format
- 5.37 SEEK (10) Command (2Bh)
- Table 5-190 SEEK (10) Command Descriptor Block-Data Format
- 5.38 SEND DIAGNOSTIC Command (1Dh)
- Table 5-191 SEND DIAGNOSTIC Command Descriptor Block-Data Format
- Table 5-192 SEND DIAGNOSTIC Command -Field Descriptions
- 5.38.1 Supported Diagnostic Page List
- Table 5-193 Supported Diagnostic Page List -Data Format
- 5.38.2 Translate Address Page
- Table 5-194 Translate Address Page-Data Format
- 5.39 SET DEVICE IDENTIFIER Command (A4h)
- Table 5-195 SET DEVICE IDENTIFIER Command Descriptor Block-Data Format
- Table 5-196 SET DEVICE IDENTIFIER Command Descriptor Block-Field Descriptions
- Table 5-197 SET DEVICE IDENTIFIER Parameter List-Data Format
- Table 5-198 SET DEVICE IDENTIFIER Parameter List-Field Descriptions
- 5.40 START STOP UNIT Command (1Bh)
- Table 5-199 START STOP UNIT Command Descriptor Block-Data Format
- Table 5-200 START STOP UNIT Command-Field Descriptions
- 5.41 SYNCHRONIZE CACHE Command (35h)
- Table 5-201 SYNCHRONIZE CACHE Command Descriptor Block-Data Format
- Table 5-202 SYNCHRONIZE CACHE Command -Field Descriptions
- 5.42 TEST UNIT READY Command (00h)
- Table 5-203 TEST UNIT READY Command Descriptor Block-Data Format
- 5.43 VERIFY Command (2Fh)
- Table 5-204 VERIFY Command Descriptor Block-Data Format
- Table 5-205 VERIFY Command-Field Descriptions
- 5.44 WRITE (6) Command (0Ah)
- Table 5-206 WRITE (6) Command Descriptor Block-Data Format
- Table 5-207 WRITE (6) Command -Field Descriptions
- 5.45 WRITE (10) Command (2Ah)
- Table 5-208 WRITE (10) Command Descriptor Block-Data Format
- Table 5-209 WRITE (10) Command -Field Descriptions
- 5.46 WRITE AND VERIFY Command (2Eh)
- Table 5-210 WRITE AND VERIFY Command Descriptor Block-Data Format
- Table 5-211 WRITE AND VERIFY Command -Field Descriptions
- 5.47 WRITE BUFFER Command (3Bh)
- Table 5-212 WRITE BUFFER Command Descriptor Block-Data Format
- Table 5-213 WRITE BUFFER Command -Field Descriptions
- 5.48 WRITE LONG Command (3Fh)
- Table 5-214 WRITE LONG Command Descriptor Block-Data Format
- Table 5-215 WRITE LONG Command-Field Descriptions
- 5.49 WRITE SAME COMMAND
- Table 5-216 WRITE SAME Command Descriptor Block-Data Format
- Table 5-217 WRITE SAME Field Description
- 5.50 WRITE SKIP MASK Command (EAh)
- Table 5-218 WRITE SKIP MASK Command (EAh)
- Table 5-219 WRITE SKIP MASK Command - Field Description
- Chapter 6 FEATURE DESCRIPTIONS
- 6.1 KEY FEATURES
- 6.2 WRITE-BACK CACHING
- 6.3 ZERO LATENCY READ/WRITE
- 6.4 DISCONNECT-RECONNECT
- 6.5 TRACK AND CYLINDER SKEWING
- 6.6 AVERAGE ACCESS TIME
- 6.7 EMBEDDED SERVO SYSTEM
- 6.8 DATA INTEGRITY AND SECURITY
- 6.8.1 Media Error Protection
- 6.8.2 Transfer Error Protection
- 6.8.3 Addressing Error Protection
- 6.8.4 Data Sector Reallocation Error Protection
- 6.8.5 Data Verification
- 6.9 TAGGED COMMAND QUEUING
- 6.10 COMMAND REORDERING
- 6.11 BANDED RECORDING
- 6.12 DIAGNOSTICS
- 6.12.1 Power On Self Test (POST)
- 6.12.2 Periodic Self-Adjustments
- 6.12.3 Host Diagnostics
- 6.12.4 Log Sense
- 6.13 ERROR RECOVERY
- 6.13.1 Seek Error Recovery
- 6.13.2 Data Read Errors
- 6.13.3 Reallocation of Bad Blocks
- 6.14 THE ULTRA160 and ULTRA320 LOW VOLTAGE DIFFERENTIAL (LVD) SCSI INTERFACE
- 6.14.1 DIFFSENS
- 6.14.2 DIFFSENS SWITCHING
- 6.14.3 DT AND ST CLOCKING
- Figure 6-1 ST and DT CLocking
- 6.14.4 CYCLIC REDUNDANCY CHECKING
- 6.14.5 DOMAIN VALIDATION
- 6.14.6 Adaptive Active Filter (AAF)
- 6.14.7 Transmitter Pre-Compensation with Cutback
- 6.14.8 Free Running Clock (FRC)
- 6.14.9 Skew Compensation
- 6.14.10 Information Unit Transfers
- 6.15 HOT PLUGGING/REMOVAL AND INSERTION OF SCSI DEVICES
- 6.15.1 System Considerations
- 6.15.2 APPLICABLE SCSI PHYSICAL DOCUMENTS
- Appendix A QUICK REFERENCE
- A.1 SCSI-2/SCSI-3 Equivalent Terminology
- Table A-1 SCSI-2/SCSI-3 Equivalent Terminology
- A.2 SCSI Commands and Messages
- Table A-2 SCSI-3 Quick Reference - Commands
- Table A-3 SCSI-3 Quick Reference - Messages
- A.3 SCSI Pages
- Table A-4 SCSI-3 Quick Reference - Pages
- A.4 Sense Keys
- Table A-5 SCSI-3 Quick Reference - Sense Keys
- A.5 Status Codes
- Table A-6 SCSI-3 Quick Reference - Status Codes
- Appendix B NEGOTIATED RATE INFORMATION PAGE REFERENCE
- B.1 TRANSFER PERIOD FACTOR FIELD
- Table B-1 Transfer Period Factor Field Values When PARL = 1
- Table B-2 Transfer Period Factor Field Values When PARL = 0
- B.2 Settings for the QAS, DT, and IU fields
- Table B-3 Settings for the QAS, DT, and IU Fields of the Negotiated Rate Information Page (INQUIRY Command)