Channel selection, Sleep timer – MITSUBISHI ELECTRIC LT-3050 User Manual

Page 26

Remote Control Functions: Channel Selection, Sleep Timer

Channel Selection

1. Enter three numbers ( ex. for channel 2, press 002).

Press the channel number and ENTER (ex. for

channel 2, press 2, then ENTER).

Enter the channel number and wait four seconds

(without pressing ENTER). The TV will change

automatically.

Sleep Timer

(Figures 3 & 4)

Setting the Sleep Timer:

1. Press SLEEP on the remote control.

2. A message indicating the length of time the sleep

timer is to be set appears on the TV screen.

3. Each press of SLEEP will increase the time

displayed by 30 minutes, until the maximum value
of 120 minutes is reached.

4. After 5 seconds of inactivity, the message will

disappear.

5. Press SLEEP to view the remaining time before the

timer turns the TV off.

Canceling the Sleep Timer:

1. Press the SLEEP button to display the on-screen

message.

2. Press SLEEP repeatedly until OFF is displayed.

After 5 seconds of inactivity, the message will

disappear.

Sleep: 30 min.

Figure 4. On-screen display for sleep timer

Figure 3 . Sleep button on remote control

Note:

Use the CANCEL button for digital subchannel (-)

selection in the CABLE/DBS/DTV layer.

��

�

��

�

��

�

��

�

��