Marantz PMD570 User Manual

Page 26

How to set or change the Date and time
The date and time are written on each audio track
(file) when the track is started. When an audio track
is viewed on a computer this date and time appears
as when the file was 'modified'. (US Date Form is
illustrated.)

1. From stop push and release the MENU/STORE

button.

2. Turn the Jog Wheel to select Preset1, 2 or 3.

3. Push and release the Jog Wheel to accept the

selected Preset.

4. Turn the Jog Wheel so Date/Time is displayed

and flashing.

- 26 -

5. While Date/Time is flashing push and release the

Jog Wheel. Date and time information will be
displayed with the month flashing.

6. Turn the Jog Wheel until the current month is

displayed.

7. Push and release the Jog Wheel to confirm the

month. The day will be flashing.

Example
display

8. With the day flashing turn the Jog Wheel to tab

through days.

9. When the day is correct, push and release the Jog

Wheel to confirm. The year will be flashing.

Example
display

10. With the year flashing turn the Jog Wheel to tab

through years. 2003-2099 are selectable.

11. When the year is correct, push and release the Jog

Wheel to confirm. The hour will be flashing.

Example
display

12. With the hour flashing turn the Jog Wheel to tab

through hours. AM, PM will change when you
pass 12, check that it is correct.

13. When the hour and AM/PM are correct push and

release the Jog Wheel to confirm. The minute will
be flashing.

Example
display

14. With the minute flashing turn the Jog Wheel to tab

through minutes (00 through 59).

15. When the minute is correct, push and release the

Jog Wheel to confirm. Seconds will be flashing.

Example
display

13. With seconds flashing turn the Jog Wheel to tab

through seconds (00 through 59).

14. When the second is correct, push and release the

Jog Wheel to confirm. Date/Time will be flashing

15. If you are done making Menu changes to the

Preset, push and release the MENU/STORE
button to save your changes,

(or push and release the Stop CANCEL button
to cancel all changes).

Display returns to stop mode.

Notes:

• The Date/Time settings will remain for about 5

years if the PMD570 is not plugged in.

• Date/Time setting applies to all three presets.
• If you set any of the three Presets to default, you

have to reset the Date and Time.

stored will be
displayed
briefly