MGE UPS Systems 66074 - Manual (Page 38)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 38/69
Z Enter New Manager Login: Text field limited to 10 characters. Enables secure access and modification of
pages. Default value “MGEUPS”.
Z Enter New Password: Text field limited to 10 characters. Enables secure access to the sections of the
Configuration menu. Default value “MGEUPS”.
Z Confirm New Password: Text field limited to 10 characters. Must be strictly identical (including
upper/lower case) to the field above .
Z SNMP Access Control: permits to limit or disable SNMP access.
- Read / Write: All SNMP operations are allowed
- Read only: only read operations can be done. . When selecting this mode,
- Disable: Card doesn't manage SNMP
Z Current Community Read-only is: Enables read-only SNMP access control (GET). Default value “public”.
Z Change Community Read-only: Text field limited to 31 characters. This field is only validated after
clicking on “Save” . Default value “public”.
Z Current Community Read/Write is: Enables read and write SNMP access control (GET and SET).
Default value “public”.
Z Change Community Read/Write: Text field limited to 31 characters. This field is only validated after
clicking on “Save” . Default value “public”.