Multi-Tech Systems MT2834ZPX - Manual (Page 44)

44
MT2834ZPX Owner's Manual
S29
Local Inactivity Timer
Unit: minutes
Range: 1-255
Default: 20
Description: Defines the amount of idle time that can elapse between AT
commands after the SETUP password has been entered.
S30
Inactivity Timer
Unit: 1 minute
Range: 0-255
Default: 0
Description: Inactivity timer used to disconnect the modem.
S32
Time Elapse for Escape Sequence
Unit: 1 second
Range: 0-255
Default: 20
Description: Sets the duration in which modem waits for a to be entered
during escape sequence execution.
S34
Buffer Length of Command Mode...After On-line Escape Sequence
Unit: ASCII Character
Range: 0-60
Default: 10
Description: Sets buffer length of command mode after on-line escape
sequence.