Multi-Tech Systems MT2834ZPX - Manual (Page 30)

30
MT2834ZPX Owner's Manual
COMMAND: I9
VALUES: N/A
DEFAULT: Read Only Command
DESCRIPTION:
The I9 command is a query to display this modem's
characteristics when operating within Windows 95.
Entering
ATI9 invokes ZPX 28800 FAX CT
on your video monitor.
(The response to the query reveals that this modem is a
ZPX, 28.8K, FAX and Class Two capable device.)
COMMAND: L
VALUES: 5, 6, 7, 8, 9, 10 and 11
DEFAULT: Read Only Command
DESCRIPTION:
L5 lists all current operating parameters.
L6 lists all current S-Register values.
L7 lists additional parameters.
L8 lists current on-line diagnostics.
L9 displays Signal Strength Information.
L10 displays Signal to Noise Ratio
Information.
L11 displays Noise Information.
COMMAND: #Ln
VALUES: n = 0 thru 3
DEFAULT: #L0
DESCRIPTION:
#L0 selects modems to negotiate V.42 Mode.
#L1 selects MNP on and LAP-M off.
#L2 selects LAP-M on and MNP off.
#L3 selects no detection phase, go directly to LAP-M.