Philips Magnavox MC194EMG - Manual (Page 7)

Hooking Up the TV/VCR (cont’d) 7
STOP/EJECT REW PLAY F.FWD REC/OTR POWER VOLUME CHANNEL
VIDEO AUDIO EARPHONE
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEO AUDIO
• Audio and video cables are not supplied. If your VCR, Camcorder, or DVD Player has red and white audio jacks,
connect only the white jacks. Or, purchase an audio cable that converts stereo to mono (monaural). It will have
red and white plugs on one end (for the VCR, etc.) and a single white plug on the other end (for the TV/VCR).
• Before connecting an antenna or Cable TV signal to the ANT(enna) Jack, make sure the pin is not bent. If the
pin is bent, straighten it as illustrated, then connect the antenna or Cable TV signal to the ANT(enna) Jack.
Helpful Hints
Crooked Pin Straight Pin
Bent pin
Plug Cable
AUDIO/VIDEO In Jacks
on front of TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR (example)
Connect an Audio cable to the AUDIO
OUT Jack on the VCR and to the AUDIO In
Jack (white) on the front of the TV/VCR.
Connect a Video cable to the VIDEO OUT
Jack on the VCR and to the VIDEO In Jack
(yellow) on the front of the TV/VCR.
3 Follow the steps on page eight when you turn on the TV/VCR for the
first time.
2 When all connections are complete, plug in the TV/VCR’s power cord.
D Hooking Up Your TV/VCR to Another Video Source (VCR, Camcorder, DVD
Player, etc.)
You may need this connection if you want to copy tapes, view tapes playing on a VCR or
Camcorder, or view Discs from a DVD Player. Select channel 00 (AUX) at the TV/VCR when view-
ing tapes/Discs playing on the VCR, Camcorder, or DVD Player.