MSI FUZZY CX700D User Manual
Page 49
3-13
BIOS Setup
OnChip IDE Channel 1
The integrated peripheral controller contains an IDE interface with support
for one IDE channel. Choose [Enabled] to activate the IDE channel 1.
IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching, for faster drive
accesses. When you install a primary and/or secondary add-in IDE interface,
set this option to [Disabled] if the interface does not support prefetching.
Secondary Master/Slave PIO
The IDE PIO (Programmed Input/Output) fields let you set a PIO mode for the
IDE devices that the onboard IDE interface supports. Modes 0 through 4
provide successively increased performance. In [Auto] mode, the system
automatically determines the best mode for each device.
Secondary Master/Slave UDMA
Ultra DMA 33/66/100/133 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA driver
(Windows ME, XP or a third-party IDE bus master driver). If your hard drive
and your system software both support Ultra DMA/33, Ultra DMA/66, Ultra
DMA/100 and Ultra DMA/133, select [Auto] to enable BIOS support.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select [Enabled] for automatic detection of the optimal number of
block read/writes per sector the drive can support.
VIA OnChip PCI Device
PDF created with pdfFactory Pro trial versi