Marantz SR4600 User Manual
Page 24
21
ENGLISH
HT-EQ :
Select to active the HT-EQ with the or cursor
buttons.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is
because film soundtracks were designed to be
played back in large movie theater environments.
Activating the HT-EQ feature when watching a
film made for movie theaters corrects this and
restores the correct tonal balance.
The HT-EQ feature is available except in the
following modes.
• 7.1 CH INPUT
• PURE-DIRECT
• When VIRTUAL is set for the surround mode
LFE LEVEL :
Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0 dB, -10 dB or OFF with the or cursor
buttons.
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP MAIN
MENU by pressing the
ENTER
button.
4. SURROUND
This sub menu is to adjust channel levels for each
surround setting groups. There are three surround
setting groups shown below. Therefore if settings
for a surround mode are changed, settings for all
other surround modes in the same group are also
changed.
Surround setting group
1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL,
STEREO
2 : Multi-ch stereo
3 : CS
II
1.
Select “4. SURROUND” in SETUP MENU
with or cursor button.
2.
Press the
ENTER
button.
3.
To select a desired item, press or cursor
button.
4.
Using the or cursor button to select the mode
or adjust the volume level of each speaker.
5.
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP
MENU by pressing the
ENTER
button.
Or press the or cursor button to select
“EXIT” then press the
ENTER
button to exit
the SETUP MENU.
SR(SURR-MODE) :
Select the desired surround mode with
or
cursor button.
• If one of the following modes is selected, all other
modes are also set to the same. AUTO, DOLBY,
DTS, EX/ES, VIRTUAL, STEREO.
5.
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP
MENU by pressing the
ENTER
button.
Or press the or cursor button to select
“EXIT” then press the
ENTER
button to exit
the SETUP MENU.
BASS MIX
• The BASS MIX setting is only valid when
“LARGE” is set for the front speakers and “YES”
is set for the subwoofer at stereo playback .
• When the “BOTH” is selected, the low
frequency signal range of “LARGE” are
produced simultaneously from those channels
and the subwoofer channel.
When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.
• When “ MIX” is selected, subwoofer output is
determined depending on the speaker sizes for
each channels. If the front speaker size is set to
“Large”, subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.
Note:
• When Front speaker is set ”SMALL”, then BASS
MIX is set “MIX”. (The display appears “BASS
MIX =
✱✱✱”.)
SURROUND MODE
HT-EQ
LFE
EXIT
TO MAIN MENU
exit SETUP
MENU
4.SURROUND
MENU STRUCTURE of SURROUND setup
3. PREFERENCE
1.
Select “3. PREFERENCE” in SETUP MENU
with or cursor button.
2.
Press the
ENTER
button.
3.
Press or cursor button to select desired
item.
4.
Press or cursor button to set the mode.
DTS
PURE DIRECT
AUTO
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
ENTER
3. 4.
2. 4.
1. 4.
DTS
PURE DIRECT
AUTO
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
ENTER
4. 5.
2. 5.
1. 3. 5.
SURROUND
ND RECEIVER SR4600
D
NES
EAKER
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MT X 6.1
EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL
S
SR
LFE
4. 5.
2. 5.
1. 3. 5.
MENU STRUCTURE of SURROUND setup
MENU STRUCTURE of PREFERENCE setup
NOMAL
ECONOMY
STBY
TO MAIN MENU
EXIT
exit SETUP MENU
3.PREFERENCE
STANDBY MODE:
When this function is set to "ECONOMY",
you can reduce the power consumption when
the unit is in the standby mode.
This menu (BASS) will not be displayed, if SUBW is set "NONE".
For L&R is "SMALL" :
The low frequency signal range of front L/R are outputted to a subwoofer
simultaneously with the LFE signal.
For L&R is "LARGE" :
The low frequency signal range of front L/R are not output to subwoofer.
BOTH
MIX
***
BASS
The low frequency signal range of front L/R are outputted to a subwoofer
simultaneously with the LFE signal.
7.1-V
LAST>TV>DVD>…>V-OFF>
MENU STRUCTURE of PREFERENCE setup
SURROUND
ND RECEIVER SR4600
D
NES
EAKER
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MT X 6.1
EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL
S
SR
LFE
3. 4.
2. 4.
1. 4
05.5.20, 5:41 PM
Page 21