beautypg.com

Marantz SR4600 User Manual

Page 23

background image

ENGLISH

20

1.

When you select “MANUAL” in T-MODE menu
by pressing the or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the button. This unit will emit the
pink noise from the center speaker.

2.

Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between – 10 and +10 dB in 1dB
intervals).

3.

Press the cursor button again. This unit will
now emit the pink noise from the front right
speaker.

4.

Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.

5.

Press the

ENTER

button, you can stop the

test tone mode. Or press the or cursor
button to select “EXIT” then press the

ENTER

button to exit the SETUP MENU.
Or press the or button to select
“RETURN” then press the

ENTER

button to

return the previous “2-2. Speakers Distance”
setup.

Notes:

• Speakers that you selected “None” for in the

Speaker Size Setup menu will not appear.

• The setup level for each channel is memorized for

reproduction in all surround mode by this method
exclude CS mode, Multi channel stereo mode and
7.1 ch input mode.

• To adjust the speaker levels for 7.1-channel input

sources, you will need to use the 7.1CH Level
Input setup menu.

2-3. SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level. Moreover, if the

T.TONE

button is pressed,

unit can enter into this menu directly.

Note:

• The speaker level settings are not available in 7.1

Channel Input mode, CS mode and Multi Channel
Stereo mode.

T(TEST) MODE :

Selects “

MANUAL

” or “

AUTO

” for generating

mode of test tone or cursor button.

If you select “

AUTO

by pressing the button, the

test tone will be cycled through in a circular pattern
which is L (Left)

C (Center)

R (Right)

SR

(Surround Right)

SBR (Surround Back Right)

SBL (Surround Back Left)

SL (Surround Left)

SW (Subwoofer)

L

.. increments of 2 seconds

for each channel.
Using the and cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
Press the

ENTER

button, you can stop the test

tone mode. Or press the or cursor button to
select “EXIT” then press the

ENTER

button to exit

the SETUP MENU.
Or press the or cursor button to select
“RETURN” then press the

ENTER

button to return

the previous “2-2. Speakers Distance” setup.

If you select “

MANUAL

”, adjust the output level of

each speaker as follow.

2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE

Channel level (speaker level) can be adjusted
without using test tone.

Note:

• Four channel level settings can be memorized for

reproduction: the 7.1 ch input mode, CS mode,
Multi channel stereo mode, and all other surround
modes, respectively.

1.

Set the surround mode or 7.1 ch input mode
which you want to adjust the channel level.

2.

Press the

CH.SEL

button on the remote.

3.

Select the desired channel (speaker) with the

or cursor buttons.

4.

Adjust the level with the or cursor buttons.

5.

After completing the setup, press the

CH.SEL

button again.

MENU STRUCTURE of Speakers Level setup

MANU

AUTO

SW

L

C

SBR

R

SL

SR

EXIT

RETURN

TO MAIN MENU

SBL

Speaker

(Auto)

Speakers

Distance setup

MAIN

MENU

exit SETUP

MENU

Test Tone mode

Speakers

Level setup

Speakers

Distance

setup

Direct select

by remote

control

Listening

Positiom

1. 5.

5.

2. 5.

1. 3. 5.

NIGHT

CSII

EX/ES

VIRTUAL

DTS

PURE DIRECT

AUTO

3

2

1

6

5

4

T.TONE

MENU OFF

SET UP/

MENU

OSD

VOL.

TV

VOL.

MAIN

SLEEP

MUTE

AMP

ENTER

AUX1

MAIN

MENU STRUCTURE of Speaker Level setup

+10dB

+9dB

-9dB

Minimum

Maximum

1 dB interval

Reference

1 dB interval

-10dB

(SW -15 dB)

button

button

0dB

SURROUND

AV SURROUND RECEIVER SR4600

INPUT SELECTOR

PHONES

STANDBY

7.1CH INPUT

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

MENU

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP

MULTI

AUTO

TUNED

ST

V – OFF

NIGHT

PEAK

ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT

DISC 6.1

MT X 6.1

EQ

DIGITAL

SURROUND

AAC

PCM

L

C

R

SL

S

SR

LFE

POWER ON/STANDBY

S. SPEAKER B

1. 5.

5.

1. 2. 5.

1. 3. 5.

05.5.20, 5:41 PM

Page 20