Motorola WR850 - Manual (Page 22)

Installation Section 2
WR850 2-5
8 If necessary, seat an anchor in each hole. Use M5 x 38 mm (#10-16 x 11/2 inch) screws
9
– There must be 4.0 mm (.16 inches) between the wall and the underside of the screw
head.
– The maximum distance f the screw head is 7.6 mm (.3 in).
with a flat underside and maximum screw head diameter of 10.5 mm to mount the
router.
Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:
rom the wall to the top of
10.5 mm (.4 inches)
maximum
7.6 mm (.3 inches)
maximum
4.0 mm
10 Remove the two plastic feet, nearest to the LED panel, from the bottom of t
uncover the keyholes.
he router to
12 Slide the router down until it stops against the top of the keyhole opening.
13 Follow the installation procedures for connecting and configuring the router.
11 Place the router so the keyholes are above the mounting screws.