Motorola WR850 - Manual (Page 18)

WR850 2-1
Section 2:Installation
To get your network up and running:
Set up your hardware.
Insert the CD-ROM for product set up. Follow the prompts.
If you prefer to set up the router’s software manually, refer to the Manual Software Setup
found later in this section.
The following sections provide detailed instructions for completing these tasks.
Hardware Setup
Hardware setup includes:
Antenna Installation: connecting the antenna to the router.
Physical Installation: where you physically place your router.
Electrical Connection: how to connect the power cord.
Antenna Installation
When shipped, the antenna for the WR850GP is not connected to the router. To attach the
antenna to the router:
1 Locate the antenna port on the back of the router (the threaded knob).
2 Screw the antenna connector clockwise on to the threaded knob until firmly seated. Do
not over-tighten.