Magellan eXplorist 100 - Manual (Page 38)

Routes 33
Creating a GOTO Route
The instructions here describe the most common and easiest way to create a GOTO
route.
1. Press GOTO.
2. Use the Arrow joystick to highlight Nearest or
Alphabetical.
3. Press ENTER
4. Use the Arrow joystick to highlight the POI you want to
go to.
5. Press ENTER.
6. If you already have a GOTO you will be asked to
confirm the creation of this GOTO.
After you press ENTER, the last viewed navigation screen will be displayed, updated as
needed to provide information about the GOTO route you have created. On the
Plotter
screen, a line will be drawn representing the GOTO route. The Compass screen will
change to display the name of the POI used as the destination in the screen header
bar and an icon representing the destination outside the diameter of the compass.
1.60mi
352
o
M
4.3 M
H
Heading Speed
OakTree
CA
Plotter screen with an
active GOTO route.