Installing the ink sheet, Installing the ink casseette, Set the printing unit – MITSUBISHI ELECTRIC DIS710E User Manual
Page 9
9
White roller
A
B
C
E
Coloured roller
INSTALLING THE INK SHEET
Install the ink cassette with the ink sheet rolls before inserting the
ink cassette into the printer.
1
1
1
1
1
Put the coloured roller of the ink sheet to the ink cassette.
A
A
A
A
A
B
B
B
B
B
2
2
2
2
2
Put the thin stick of white roller to the ink cassette.
C
C
C
C
C
3
3
3
3
3
Put the thick stick of white roller to the ink cassette.
DE
DE
DE
DE
DE
On the
D
position, turn the roller and set the notch of the roller side
to the hole of the cassette.
The roller can be installed when notch is put through the hole.
E
D
notch
INSTALLING THE INK CASSEETTE
1
1
1
1
1
Eliminate any slack of the ink sheet.
Hold the roller
A
and
B
and turn the white roller.
2
2
2
2
2
Insert the ink cassette with the ink sheet into its
compartment.
Insert the ink cassette with the knob side toward you until it is
locked into place.
• When taking the ink cassette out of the compartment, press
the ink cassette locking holder to release the lock.
SET THE PRINTING UNIT
1
1
1
1
1
Push the printing unit until it is locked into place.
2
2
2
2
2
After plugging the power cord, press POWER button on the
front panel.
3
3
3
3
3
Press the MEMORY button for about 1 second while holding
the MONITOR button on the front panel .
• The print paper is automatically cut after sending by about
10cm.
4
4
4
4
4
Repeat 3 step.
(Fingerprints and dust can be removed by feeding the print
paper. The printing unit is initialized.)
A
B