MITSUBISHI ELECTRIC DIS710E - Manual (Page 8)

8
2 2 2 2 2
Insert the print paper in the position as shown right.
Place the gear to the right side.
Set the paper roll first on the right side paper holder.
Then, set the paper roll on the left side paper holder.
Print paper
Holder
Install
Holder
Print paper
Right side
Left side
3 3 3 3 3
Insert the print paper between roller
1 1 1 1 1
and
2 2 2 2 2
.
4 4 4 4 4
Insert the edge of the print paper to roller
3 3 3 3 3
.
Be sure to insert the paper straight.
Roller Roller Roller
Paper Paper Paper
INCORRECT CORRECT INCORRECT
1 Roller
2 Roller
3 Roller
Print paper
1
5 5 5 5 5
Feed the print paper through the exit slot straight with your
hand.
6 6 6 6 6
Pull the print paper to eliminate slack.
NOTE
If too much paper is fed, an error may occur. ("PAPER JAM12"
is indicated on the monitor screen.) In this case, press the
MEMORY button while holding the MONITOR button for a
second.
7 7 7 7 7
Move the knob on the side of the printing unit to the
direction as indicated by the arrow.