MITSUBISHI ELECTRIC Mr.Slim MSY-A24NA - Manual (Page 7)

4
(This diagram shows an overall view.)
NAME OF EACH PART
Remote controller
PREPARATION BEFORE OPERATION
Auto restart function
■
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, “Auto restart function” sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Breaker for the air conditioner
■
Turn the breaker on.
Fan speed control button
Signal transmitting section
Operation display section
Operation select button
ECONO COOL button On-timer button
CLOCK set button
TIME set buttons
Forward button
Backward button
Temperature buttons
Off-timer button
RESET button
(This diagram shows an overall view.)
ON/OFF (operate/
stop) button
Open the front lid.
POWERFUL button
NOTE
Use the remote controller
provided with the unit only.
Do not use other remote
controller.
WIDE VANE button
(Vertical vane button)
VANE button
(Horizontal vane button)