MITSUBISHI ELECTRIC Mr.Slim MSY-A24NA - Manual (Page 15)

8
ECONO COOL OPERATION
Use this operation when you want to be comfortable in COOL mode even with energy saved.
Perform the following operations while the unit is operat-
ing in the MANUAL COOL mode.
■
Press the ECONO COOL button.
When the (ECONO COOL) operation is selected in COOL mode, the air
conditioner performs swing operation in various cycle according to the tem-
perature of air conditioner.
Also SET TEMPERATURE is automatically set 4°F higher than in COOL mode.
To release the ECONO COOL operation:
■
Press the ECONO COOL button again.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• When the
VANE
button or the button is pressed or the operation mode
is changed during the ECONO COOL operation, ECONO COOL operation
is released.
• The
FAN
button, the
TOO WARM
or
TOO COOL
button and ON/OFF timer (explained below)
are available.
What is “ECONO COOL”?
Swing air flow (change of air flow) makes you feel cooler than constant air flow. So, even though the set temperature is
automatically set 4°F higher, it is possible to perform cooling operation with keeping comfort. As a result, energy can be saved.
POWERFUL OPERATION
Use this operation when you want to cool your room within a short time period.
Perform the following operations while the unit is operat-
ing in the MANUAL COOL mode.
■
Press the button.
The air conditioner automatically adjusts the fan speed and the set tempera-
ture, and operates the POWERFUL mode. The POWERFUL mode is automati-
cally released 15 minutes after operation starts, and the operation mode re-
turns to the mode prior to POWERFUL operation.
POWERFUL mode
* Exclusive for POWERFUL mode
** When the position of the horizontal vane is set to
(AUTO) during cooling
operation, the air is blown downward.
To release the POWERFUL mode before it is released auto-
matically:
■
Press the button again.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
■
POWERFUL mode is also released in the following ways:
• By pressing the
ON/OFF
button
• By pressing the
FAN
button
• By pressing the
ECONO COOL
button
• By setting the ON timer
■
The
TOO WARM and TOO COOL buttons are not available during the POWERFUL
operation.
■
The VANE button is available.
Position of
horizontal vane
Set position**
Fan speed
POWERFUL-high*