MicroNet Technology SP5001A/S User Manual
Page 83
Parameter Usage:
Specify which tone settings you want to display
ring
: ring tone settings
rbt
: ring back tone settings
bt
: busy tone settings
dt
: dial tone settings
flash
: flash time settings
-ring
To set RING tone value. The played tone type, when Gateway is
receiving a call.
-rbt
To set Ring Back Tone value. The played tone type, when
Gateway receives a Q.931 Alerting message. In condition that
Gateway is the originate side.
-bt
To set Busy Tone value. The played tone type, when destination is
busy.
-dt
To set Dial Tone value. The played tone type, when hook off a
phone set of workable Gateway.
-flash
Set the detective flash range in ms, for example, 400-800 ms.
-level
Loop Current and On-Hook Line Voltage level set.
Note:
For tone simulation, Gateway adopts dual frequencies as traditional telephone does. If
users want to have their own call progress tone, they can change the value of tones.
High and Low frequency/level/cadence can be configured respectively.
82