Setting up the gateway, Connecting the sp5001a/s, Onnecting the – MicroNet Technology SP5001A/S User Manual
Page 10: Sp5001a/s
2. Setting Up the Gateway
This chapter will describe the basic connection setup and configure the gateway via
your web browser through a computer. It outlines how to connect your VoIP Gateway
to the LAN and the WAN. In the case of connecting a Cable Modem you must connect
the coaxial cable from your cable service to the threaded coaxial cable connect on the
back of the cable modem.
2.1. Connecting the SP5001A/S
1. Turn off your computer
2. Turn off the DSL or cable broadband modem
3. Connect the Ethernet cable from WAN port to the ADSL or Cable modem
Ethernet port.
4. Connect the Ethernet cable from LAN port to the Ethernet adapter in your
computer
9