Flash, [flash – MicroNet Technology SP5001A/S User Manual

Page 73

Text mode
Original mode

6.11. [flash]

Restore the gateway’s configurations back to default.

usr/config$ flash

Flash memory information and configuration

Usage:

flash -clean

Note:

This command will clean the configuration stored in

the flash and reboot it.

Parameter Usage:

-clean

clean all the user defined value, and reboot Gateway in factory
default mode

Note:
It is recommended that use [flash -clean] after application firmware upgraded.
User whose login name is root only executes it. All configurations in command [ifaddr]
and [pppoe] will be kept.