Motorola DTR2430 - Manual (Page 57)

6864242V01 June 22, 2006
Cloning Mode: Reset All Contacts 5-3
10. Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
11. The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send-
ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt
cloning again to any members of this list.
Reset All Contacts
This key sequence deletes all contacts in the radio. This is useful for radio programming and rental
radios.
a. Hold down and press the PTT button three times.
b. Press .
c. Press .
d. Press the Right
e. Hold down and press the PTT button three times.
Press Go To
Go Back
Add:Joe Smith
To:Security
Over The Air