Motorola DTR2430 - Manual (Page 43)

6864242V01 June 22, 2006
Advanced Radio Operations: Accessing the Advanced Menu 3-3
Remote Disabling (DTR2450 Models Only)
NOTE: Manager Mode must be enabled in order for a user to use this feature. Refer to page 4-9.
Remote Disabling allows a user to remotely enable or disable another DTR Series radio on their
channel. The selected radio must be turned on and within range in order to be enabled or disabled.
1. From the Advance menu, scroll to highlight Remote Disable and press under Select.
The Remote Disable screen appears.
2. Scroll to highlight a radio name from the list. Press under either Enable or Disable.
The screen changes to confirm the selection.
NOTE: To cancel out of Remote Disable, press and press under Select.
3. To enable or disable the selected radio, press under either Yes or No.
Once the radio is disabled, the display shows “Radio Disabled” and the radio cannot transmit,
receive, or access it’s contacts.
Advanced
Scroll List
Call Forward
Remote Disable
Select Back
Joe Smith
Jones
Kevin
Disable
Remote Disable
Enable
Joe Smith
Radio Disabled