Chapter 5 cloning mode – Motorola DTR2430 User Manual
Page 55
Chapter 5
Cloning Mode
Entering Cloning Mode
1.
Press
to turn the source radio on.
2.
Enter the cloning mode by performing the following steps in sequence:
a. Hold down
and press the PTT button three times.
b. Press the Left
.
c. Press .
d. Press the Right
e. Hold down
and press the PTT button three times. The Clone Menu appears.
Adding/Deleting a Contact
These menus are used to add or remove a contact from a Private contact or PrivateGroup contact
over the air. This feature is used primarily for fleet maintenance. When adding/deleting a contact to a
PrivateGroup contact, the radio attempts to contact all radios within that PrivateGroup and notifies
any radios that did not receive the update.
1.
From the Clone menu scroll to select Send Contact. Press
under Select.
2.
Scroll to select ADD:.
Duplicate Rad...
Select
Clone Menu
Remote Add C...
Remove Delet...
Reset
Add:Invalid
Change
To:Invalid
Prgm
Remote Add C...