Troubleshooting – Motorola CP100 User Manual
Page 36
T
ro
ubleshootin
g
30
Troubleshooting
Symptom
Try This:
No Power
Recharge or replace battery (NTN8971). Reposition or replace
alkaline batteries. For Nickel-Metal Hydride batteries, “Installing
the Nickel-Metal Hydride Battery” on page 6 or “Battery and
Charging Options” on page 11.
Message not
transmitted
Make sure
M
is completely pressed while transmitting.
Recharge, replace and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Hearing other
noises or
conversation on
a channel
Frequency or Interference Eliminator Code may be in use,
change on all radios if possible. See “Programming the
Interference Eliminator Code” on page 22.
Poor Audio
Quality
Scramble Code is On (2-watt models only), and/or setting does
not match other radios’ settings. See “Programming the
Scramble Feature” on page 23.
Bandwidth of radios does not match. See “Programming
Bandwidth (when FCC allowable)” on page 23.
operation.fm Page 30 Monday, March 3, 2003 12:59 PM