Getting started, Installing the swivel belt holster – Motorola CP100 User Manual

Page 11

Text mode
Original mode

tting S

tar

ted

Getting Started

This User’s Guide covers several CP100 models, and may detail some features your
radio does not have. Your model number is shown on the inside of the radio and can
been seen by removing the battery.

Installing the Swivel Belt Holster
1. Slide the bottom of radio into the holster until it snaps into

place.

2. To remove, push the tab above the battery door and pull the

radio from holster.

Note: In case of loss, please contact your point-of-sale or call

1-800-422-4210 to request replacement part number
NNTN4106.

CP100

NNTN4106 Swivel

Belt Holster

getstarted.fm Page 5 Monday, March 3, 2003 12:16 PM