Motorola CP100 - Manual (Page 28)

Pr
og
ramming F
eatur
es
22
Programming the Interference Eliminator Code
The Interference Eliminator Code helps minimize interference by
providing you with code combinations, which filter out static, noise,
and unwanted messages.
1. Enter Programming Mode as necessary, refer to “Entering
Programming Mode” on page 20.
2. Press \ until the Interference Eliminator Code display number
begins to flash.
3. Press [ or ] to select the desired Code (See “Interference Eliminator Codes”
beginning on page 37).
4. Press and hold M to exit k , or press
\
to continue.
Assigning Channels to Presets (15 ch models only)
Presets allow you to easily switch to more frequently-used channels.
1. Enter Programming Mode as necessary, refer to “Entering Programming Mode”
on page 20.
2. Press [ or ] to select the desired channel.
3. Press and hold T or S to assign that channel to a preset, radio beeps to
confirm. All of the channel settings are assigned to that preset button.
4. Press and hold M to exit k , or press
\
to continue.
01075
Interference
Eliminator
Code
operation.fm Page 22 Monday, March 3, 2003 12:59 PM