Programming features, Entering programming mode – Motorola CP100 User Manual
Page 26
Pr
og
ramming F
eatur
es
20
Programming Features
You can change the following features by entering the programming mode (
k
).
To talk with someone on your two-way radios, these settings must match:
•
Channel (15 ch models only)
•
Frequency
•
Interference Eliminator Code
•
Scramble code
•
Bandwidth (for optimal clarity)
You can also use
k
to set the following:
•
Call tones
•
Microphone Gain
•
Scan List (15 ch models only)
•
Available channels (15 ch models only)
Note: You cannot enter
k
while a VOX accessory is plugged into the radio.
Entering Programming Mode
You must enter Programming Mode to change your communication settings.
1. Press and hold
MJ
for three seconds while turning on your
radio. The radio beeps and displays
k
.
1
operation.fm Page 20 Monday, March 3, 2003 12:59 PM