Motorola CP100 - Manual (Page 3)

1
Table of Contents
Product Safety and RF Exposure
Compliance ...............................i
Introduction...................................1
FCC Licensing Information..........3
Getting Started..............................5
Installing the Swivel Belt
Holster ....................................5
Installing the Nickel-Metal
Hydride Battery .......................6
Charging the CP100 Radio ........7
Turning Your Radio On or Off .....8
Adjusting the Volume ..................8
Using the Radio ..........................8
Understanding the Display........10
Battery and Charging Options ..11
NiMH Battery.............................11
Alkaline Batteries ......................11
Charging with the Drop-in
Charging Tray (NNTN4019)...12
Reading the Battery Meter ........13
Battery Life................................13
CP100 Factory Defaults .............14
Talking and Receiving ............... 15
Signal Strength Indicator/
Channel Busy........................ 15
Talk Range ............................... 15
Keypad Lock............................. 16
Hands-Free Use/VOX .............. 16
With Compatible VOX
Accessories........................... 16
Without Accessories................. 17
Setting VOX Sensitivity ............ 17
Monitoring a Channel ............... 18
Scanning (15 ch models only) .. 18
Programming Features.............. 20
Entering Programming Mode ... 20
Programming a Channel
(15 ch models only)............... 21
Programming the Frequency.... 21
Programming the Interference
Eliminator Code..................... 22
Assigning Channels to Presets
(15 Ch Models Only) ............. 22
Programming the Scramble
Feature.................................. 23
Programming Bandwidth (when
FCC allowable)...................... 23
XTNTOC.fm Page 1 Monday, March 3, 2003 1:29 PM